Exterior Wall Panels

These budget-friendly systems offer quick lead times, on-site fabrication, as well as a number of different core options to suit your specific application.

A close-up illustration of a wall expansion joint with a metal cover, set between two textured white wall panels with a wood-colored trim at the top against a blue background.

Panel 15®

1pc Moldings

  • ‍5/16″ Douglas Fir Panel
  • 1/2″ System Depth
  • Barrier Wall
  • Low-Profile Moldings
  • Progressive Sequence
Cross-section illustration of a white drywall partition with a recessed aluminum trim, showing a wooden surface above and a blue background.

Panel 15®

2pc Moldings

  • ‍5/16″ Douglas Fir Panel
  • 1/2″ System Depth
  • Barrier Wall
  • Low-Profile Moldings
  • Non-Progressive Sequence
Illustration of two white wall panels connected by a central vertical joint system with a blue background, showing the structure and internal honeycomb pattern of the panels.

SinoCore®

1pc Moldings

  • ‍4mm Polypropylene Panel
  • 7/16″ System Depth
  • Barrier Wall
  • Low-Profile Moldings
  • Progressive Sequence
Close-up illustration of two white interlocking wall panels with a tongue and groove joint, set against a blue background.

SinoCore®

2pc Moldings

  • ‍4mm Polypropylene Panel
  • 7/16″ System Depth
  • Barrier Wall
  • Raised-Profile Moldings
  • Non-Progressive Sequence
A close-up illustration of two white, hollow wall panels joined together with a connector piece, set against a blue background.

ProCore™

1pc Moldings

  • ‍7mm Polypropylene Panel
  • 1/2″ System Depth
  • Barrier Wall
  • Low-Profile Moldings
  • Progressive Sequence
Close-up illustration of two white plastic panels joined together with an interlocking tongue and groove system, set against a blue background. The panels have a hollow, ribbed interior structure.

ProCore™

2pc Moldings

  • 7mm Polypropylene Panel
  • 1/2″ System Depth
  • Barrier Wall
  • Low-Profile Moldings
  • Non-Progressive Sequence
Illustration of two white panels joined vertically by an interlocking connection system, with a blue background at the top. The image focuses on the seam where the two panels meet.

Panel 20®

2pc Moldings

  • 1/8″ Phenolic Resin Panel
  • 7/16″ System Depth
  • Barrier Wall
  • Raised Profile Moldings
  • Non-Progressive Sequence

 

GlazeGuard 250 WR - Textured

Polyester

Shasta White
4′ x 10′

Metallic Silver
4′ x 8′
4′ x 10′

Classic Bronze
4′ x 8′
4′ x 10′

HAWAII

Representatives

Element Architectural Products

www.elementpanels.com

Logan Raivio
(503) 487-0822
logan@elementpanels.com

Mike Watson
(469) 518-5860
mike@elementpanels.com

IDAHO

Representatives

Element Architectural Products

www.elementpanels.com

Logan Raivio
(503) 487-0822
logan@elementpanels.com