• Available in both smooth and textured skins
  • Simple 'sheets & sticks' installation saves time & money
  • Lightweight and water resistant composition
  • Available in Kynar 500®, metallics & anodized finishes
  • Can be installed using one or two piece moldings

SinoCore® is a composite panel made by laminating either textured or smooth prefinished aluminum skins to a core of high density polypropylene. A second aluminum skin is added as a backer and provides panel balance. These panels are ideal for applications where traffic is minimal and appearance is key such as; canopies, fascia, accent bands, soffits, or corporate identity programs. And with a number of finish options, SinoCore® also helps add interest to otherwise monolithic structures (i.e. preformed warehouse walls).

Similar to ProCore™, SinoCore® panels are lightweight, water resistant, and may be field curved (for large radius requirements). However, SinoCore® panels are installed with slightly raised profile moldings to accent the shadow line.  

Composition & Materials
  Component   Standard (in)   Metric (mm)
  • Prefinished Textured Aluminum Face
  (or) Prefinished Smooth Aluminum Face
  • High Density Polypropylene Core
  • Primed Smooth Aluminum Backer
  (or) Primed Smooth Aluminum Backer

Panel Weight & Thickness
  Property   Standard (in)   Metric (mm)
  • Panel Weight
  • Nominal Thickness
  0.81 lbs/ft²
  3.93 kg/m²

Sizes Available
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12'
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144"
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm)

Panel Lamination

5 Year Warranty

For a non-progressive installation, the two piece extruded moldings may be use.  Plastic receivers are first installed, then construction adhesive is placed in the field of the panel.  The panels are then fastened around the perimeter and sealant is applied.  The joints are completed with a snap-on aluminum cover. 

For a progressive installation, the one piece moldings are used.  The extrusions are mechanically fastened to the substrate and the panels are then inserted and installed using sealant around the perimeter and construction adhesive in the field of the panel.


 Installation Videos:


 One Piece Molding System                                     Two Piece Molding System



  • High Gloss White


Series A

Standard Textured Polyester

Series B

Standard- Plus Textured Acrylic Urethane


Series D

Standard Polyester

Series F

Standard- Plus Kynar 500®

Series G

Premium Kynar 500®

Series H

Standard Kynar 500® Mica/ Metallic

Series I

Standard Anodized

Series J

Premium Anodized

Wood Grain Finishes

Many other wood grain patterns and colors are available
Available in 48" wide only