• Simple 'sheets & sticks' installation saves time & money
  • Non- Progressive installation means easy panel removal of damaged panels if necessary
  • Impact resistant thermoset phenolic resin core
  • Non- Organic materials & contains no silica
  • Most foreign matter easily cleaned using mild detergents

CleanCote® Premier™ is a composite panel for interior use made by laminating an aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer and provides panel balance. This system is designed for use as interior cladding on walls in cleanroom type applications. However, Premier™ is ideal for other applications were an easily maintained surface is the primary concern.

Similar to CleanCote® Sentinel™, Premier™ is impact resistant, water resistant, and provides ultimate smoothness. However, Premier™ is installed using moldings with a slightly higher shadow line than the flat moldings offered with Sentinel™.  


Composition & Materials
  Component   Standard (in)   Metric (mm)
  • Prefinished Smooth Aluminum Face
  • Thermoset Phenolic Resin Core
  • Primed Smooth Aluminum Backer

Panel Weight & Thickness
  Property   Standard (in)   Metric (mm)
  • Panel Weight
  • Nominal Thickness
  1.29 lbs/ft²
  6.30 kg/m²

Sizes Available
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12'
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144"
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm)

Panel Lamination
Standard Smooth Polyester
1 Year Warranty
5 Year Finish Warranty

CleanCote® Premier™ offers a non-progressive attachment system utilizing two piece (plastic receiver and an aluminum cover) extruded moldings.

First, the receiver is fastened to the studs and then covered with the edge of the panel. The panels are then mechanically fastened to the studs around the perimeter and adhered in the field of the panel using construction adhesive.  After an approved sealant is applied, the joint is completed using aluminum snap-on covers.

Our interior line of panels is available in either smooth or textured finishes in both aluminum and plastic (depending upon which product is specified).

The plastic skins are available in both textured and smooth FRP (Fiberglass Reinforced Plastic) and HDPE (High Density Polyethylene).

The standard color is white for all interior panel systems. Other colors may be available depending on product. Contact inside sales for assistance.