• Simple 'sheets & sticks' installation saves time & money
  • Non- Progressive installation means easy panel removal of damaged panels if necessary
  • Impact resistant thermoset phenolic resin core
  • Non- Organic materials & contains no silica
  • Most foreign matter easily cleaned using mild detergents

CleanCote® BioWall® is a composite panel for interior use with a thermoset phenolic resin core. This core material is surrounded by two skins of smooth or suede finish melamine. This system is designed for use as interior cladding on walls in cleanroom type applications. However, BioWall® is ideal for other applications where an easily maintained surface is the primary concern.

Similar to CleanCote® Premier™, BioWall® is impact resistant, water resistant, and provides ultimate smoothness. However, BioWall® offers a smooth or suede melamine skin as opposed to the aluminum skin standard on Premier™ panels.

 

Composition & Materials
  Component   Standard (in)   Metric (mm)
  • Suede Finish Melamine Face
    (or) Gloss Finish Melamine Face
  • Thermoset Phenolic Resin Core
  • Suede Finish Melamine Backer
    (or) Gloss Finish Melamine Backer
  ---
  ---
  3/16"
  ---
  ---
  ---
  ---
  4.76mm
  ---
  ---

Panel Weight & Thickness
  Property   Standard (in)   Metric (mm)
  • Panel Weight
  • Nominal Thickness
  1.20 lbs/ft²
  3/16"
  5.86 kg/m²
  4mm

Sizes Available
4' x 8'
4' x 10'
4' x 12'
48" x 96"
48" x 120"
48" x 144"
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)

Warranty
Panel Lamination

1 Year Warranty

CleanCote® BioWall® offers a non-progressive attachment system utilizing two piece (plastic receiver and an aluminum cover) extruded moldings.

First, the receiver is fastened to the studs and then covered with the edge of the panel. The panels are then mechanically fastened to the studs around the perimeter and adhered in the field of the panel  using construction adhesive.  After an approved sealant is applied, the joint is completed using  aluminum snap-on covers.

Our interior line of panels is available in either smooth or textured finishes in both aluminum and plastic (depending upon which product is specified).

The plastic skins are available in both textured and smooth FRP (Fiberglass Reinforced Plastic) and HDPE (High Density Polyethylene).

The standard color is white for all interior panel systems. Other colors may be available depending on product. Contact inside sales for assistance.