|
 |
• Water resistant polypropylene
substrate
• Installed in the same basic manner
as glass
• Attractive alternative or
complement to glass
• Available in Kynar 500®, metallics
& anodized finishes
• Little or no maintenance is
required
[Literature]
[Request
Samples] |
|
|
 |
GlazeGuard® 250 WR is a composite panel for use as a
glazing infill made
by laminating
two prefinished aluminum
skins to a substrate of high density polypropylene. These
panels are designed for use as a replacement or
complement to glass in windows,
storefront, railing inserts, etc.
Similar in thickness to GlazeGuard® 250 (both are
1/4"), these panels offer more
water resistance than the tempered hardboard
composition. |
|
|
|
GlazeGuard® panels are installed in aluminum
glazing/storefront channels (by others)
typically on setting blocks and sealed using rubber
gaskets. Since they are encapsulated
on all four sides by this channel, no mechanical
fasteners, adhesives, or moldings are
used in the installation of these panels.
[View
Mock Up Of Installation] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
• High Density Polypropylene Core |
.010"
.024"
1/4" |
.254mm
.609mm
6.00mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
0.72 lbs/ft²
1/4" |
3.51 kg/m²
6mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
