|
 |
• Impact resistant tempered
hardboard substrate
• Installed in the same basic manner
as glass
• Attractive alternative or
complement to glass
• Available in Kynar 500®, metallics
& anodized finishes
(as well as porcelain enamel steel)
• Little or no maintenance is
required
[Literature]
[Request
Samples] |
|
|
 |
GlazeGuard® 250 is a composite panel for use as a
glazing infill made
by laminating
two prefinished aluminum
skins to a substrate of tempered hardboard. These
panels are
designed for use as a replacement or complement to
glass in windows, storefront, modesty
screens, railing inserts, etc.
Similar in thickness to GlazeGuard® 250 WR (both are
1/4"), these panels offer more
impact resistance than the lightweight composition
offered by the plastic core. |
|
|
|
GlazeGuard® panels are installed in aluminum
glazing/storefront channels (by others)
typically on setting blocks and sealed using rubber
gaskets. Since they are encapsulated
on all four sides by this channel, no mechanical
fasteners, adhesives, or moldings are
used in the installation of these panels.
[View
Mock Up Of Installation] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
(or) Porcelain Enamel Steel Skins
• Tempered Hardboard Core |
.010"
.024"
28ga
3/16" |
.254mm
.609mm
.390mm
4.76mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
1.40 lbs/ft²
1/4" |
6.83 kg/m²
6mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
