|
 |
• Water resistant polypropylene
substrate
• Increased thermal value with EPS
or ISO foam core
• Attractive alternative or
complement to glass
• Available in Kynar 500®, metallics
& anodized finishes
• Little or no maintenance is
required
[Literature]
[Request
Samples] |
|
|
 |
GlazeGuard® 1000 WR is a composite panel for use as
a glazing infill made
by laminating
two prefinished aluminum
skins to substrates of high density polypropylene.
These
stabilizers surround a expanded polystyrene (EPS) or
isocyanurate (ISO) foam core.
These panels are designed for use as a replacement
or complement to glass in windows,
storefront, railing inserts, etc.
Similar in thickness to GlazeGuard® 1000 (both are
1"), these panels offer more
water resistance than the tempered hardboard
composition. |
|
|
|
GlazeGuard® panels are installed in aluminum
glazing/storefront channels (by others)
typically on setting blocks and sealed using rubber
gaskets. Since they are encapsulated
on all four sides by this channel, no mechanical
fasteners, adhesives, or moldings are
used in the installation of these panels.
[View
Mock Up Of Installation] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
• High Density Polypropylene Stabilizers
• Expanded Polystyrene Foam (EPS) Core
(or) Polyisocyanurate Foam (ISO) Core |
.010"
.024"
5/32"
5/8"
5/8" |
.254mm
.609mm
4.00mm
15.9mm
15.9mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
1.05 lbs/ft²
1" |
5.12 kg/m²
25mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
