|
 |
• Increased fire resistance with
gypsum board substrate
• Impact resistant tempered
hardboard substrate
• Attractive alternative or
complement to glass
• Available in Kynar 500®, metallics
& anodized finishes
(as well as porcelain enamel steel)
• Little or no maintenance is
required
[Literature]
[Request
Samples] |
|
|
 |
GlazeGuard® 1000 FR is a composite panel for use as
a glazing infill made
by laminating
two prefinished aluminum
skins to a substrate of tempered hardboard. On
the other side
of the panel a gypsum board stabilizer is used for
increased fire resistance. These
materials surround a isocyanurate (ISO) foam core. These
panels are designed for use
as a replacement or complement to glass in windows,
storefront, modesty screens, railing inserts, or
anywhere else that increased fire protection is
desired.
Similar in thickness to GlazeGuard® 1000 & 1000 WR
(all are 1"), these panels offer
more fire resistance than the plastic or tempered
hardboard compositions. |
|
|
|
GlazeGuard® panels are installed in aluminum
glazing/storefront channels (by others)
typically on setting blocks and sealed using rubber
gaskets. Since they are encapsulated
on all four sides by this channel, no mechanical
fasteners, adhesives, or moldings are
used in the installation of these panels.
[View
Mock Up Of Installation] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Textured Aluminum Skins
(or) Prefinished Smooth Aluminum Skins
(or) Porcelain Enamel Steel Skins
• Tempered Hardboard Stabilizer
• Polyisocyanurate Foam (ISO) Core
• Type-X Exterior Grade Gypsum Board |
.010"
.024"
28ga
1/8"
3/16"
5/8" |
.254mm
.609mm
.390mm
3.18mm
4.76mm
15.9mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
3.78 lbs/ft²
1" |
18.5 kg/m²
25mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12' |
48" x 96"
48" x 120"
48" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm) |
|
|
|
 |
|
|
|
|
