|
 |
• Various face options including FRP
& HDPE
• A variety of attachment options
including face applied,
one piece and two piece moldings
• Durable oriented strand board
(OSB) substrate
• Easily cleaned surface wipes free
of dirt, grease, & oil
• Saves installation with one-step
substrate / finish
[Literature] [CAD
Drawings] [Request
Samples] |
|
|
 |
EnviroGuard™ OSB is a composite panel for interior
use made by laminating a
fiberglass reinforced plastic (FRP) or high density
polyethylene (HDPE) skin to a
substrate of oriented strand board (OSB).
These panels are designed to provide an
easily maintained surface for interior wall
applications including: kitchens, restrooms,
locker rooms, food processing plants, animal
shelters, etc. |
|
|
|
EnviroGuard™ panels offer a variety of attachment
systems depending on the
appearance desired (including face applied, one
piece, and two piece moldings).
Typically, panels are fastened to the studs using
mechanical fasteners around the
perimeter of the panel. Construction adhesive
is used at the intermediates and in
the field of the panel. The joints are
finished with PVC moldings that are either
snapped or tapped into the joint, adhered to the
face of the panel, or fastened
to the panel using small brads (depending upon the
type of molding selected).
[View
One Piece Molding System]
[View
Two Piece Molding System] (shown
above) |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Fiberglass
Reinforced Plastic (FRP) Face
(or) High Density Polyethylene (HDPE) Face
• Oriented Strand Board (OSB) |
.035"
.030"
7/16" |
.890mm
.762mm
11.1mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
1.67 lbs/ft²
7/16" |
8.15 kg/m²
12mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12' |
48" x 96"
48" x 120"
48" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm) |
|
|
|
 |
|
|
|
|
