|
|
 |
|
 |
• Fully fabricated system offers
high end aesthetics
• Rout & Return (RR), RainScreen
(RS) and Reveal (RV)
attachment systems
• Dense core provides ultimate panel
flatness
• Available in Kynar 500®, metallics
& anodized finishes
• Can be curved to form clean,
graceful lines
[Literature]
[CAD
Drawings]
[Request
Samples] |
|
|
|
|
Envelope 2000® is a composite panel for exterior use made
by laminating an aluminum
skin to a substrate of thermoset phenolic resin.
A second aluminum skin is added
as a backer and provides thermal stability and panel
balance. This system is
designed for use as exterior cladding on walls,
canopies, fascias, and accent bands.
However, Envelope 2000® is also ideal for other
applications where a high end look is desired.
Similar to Panel 20®, Envelope 2000® is impact resistant, water resistant, and
provides
ultimate smoothness
in a wide variety of finishes. However, a
thicker core and fully
fabricated attachment systems takes this panel to
the next level in exterior cladding. |
|
|
|
The Rout & Return System (RR) is a barrier system in
which panels are fabricated
and formed into 'pans' and then mounted onto the
substrate using aluminum extrusions.
All fasteners are concealed and panel joints (1/2"
reveal typical) are finished with
an approved sealant.
The RainScreen System (RS) is based upon the 'rainscreen
principle' and allows
incidental water to enter the cladding cavity, but
then be drained through the system
via weepholes. Also utilizing formed panels,
this system is mounted using aluminum
extrusions. Panel joints are finished using
color matched or complementary accent
strips that 'float' within the extrusions allowing a
reveal from 1/2" to 12".
The Reveal System (RV) utilizes one piece extruded
aluminum moldings. This barrier
system features a progressive installation.
The moldings are mechanically fastened
to the substrate and then the panels are inserted
into the moldings, along with
sealant. The panel is adhered to the substrate
at the intermediates with construction
adhesive. Reveal (1/2" typical, 3" also
available) and batten profile moldings are standard.
[View
Rout & Return (RR) System] (shown
above)
[View
RainScreen (RS) System]
[View
Reveal (RV) System with Batten Moldings]
[View
Reveal (RV) System with Reveal Moldings] |
|
|
 |
|
|
|
Component |
Standard
(in) |
Metric
(mm) |
|
• Prefinished
Smooth Aluminum Face
• Thermoset Phenolic Resin Core
• Primed Smooth Aluminum Backer |
.024"
.105"
.010" |
.609mm
2.67mm
.254mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric
(mm) |
|
• Panel
Weight
• Nominal Thickness |
1.33 lbs/ft²
1/8" |
6.47 kg/m²
mm |
|
|
|
 |
|
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
|
